Instructions for Bidet Spray Installation & Replacement

Renovating your bathroom should be easy, especially when mounting or relocating a bidet spray. These extremely convenient and compact devices are one of the most important steps to living more cleanly and hygienically.

Now, whether it’s your first time installing one or if you are replacing an old bidet shower head, which is hardly the case, installing a bidet spray is easy. At https://www.plumbersingapore.org/bidet-spray-installation-replacement/,we understand that even minor modifications like a bidet spray could make a considerable distinction.

Why Install a Bidet Spray?

With the spread of knowledge regarding personal hygiene and the concern for the environment, there has been an increase in the installation of bidet showers around the globe. They provide ease and cleanliness. With an appropriate bidet shower installed, one’s ordinary use of a toilet can be transformed. However, if you need expert help, a professional plumber around Singaporecan ensure the task is achieved efficiently and without hassle.

Tools and Materials Needed

Before starting the process, it is essential to note the following tools and materials:

• A new bidet spray kit
• A pair of adjustable wrenches or pliers
• Teflon tape
• Water catchment devices such as a bucket or towel

How do you properly install a Bidet Spray step by step?

1. Turn off the Water Supply

Begin by means of remaining the water supply to the rest room. Usually, the shutoff valve might be on the wall, right in the back of the rest room. Once it’s miles grew to become off, you can flush the bathroom to put off all the water inside the tank for higher strain.

2. Disconnect the Water Hose

None of the fittings are attached in such a way that they cannot be removed, so using an adjustable wrench, start by removing the hose from the tank’s water inlet. Drill a small opening for the outflow in case there is any water remaining.

3. Attach the T-Valve

The most crucial step in setting up your bidet spray is the installation of the T-valve. You’ll have to follow these steps for a secure connection:

• Locate the Water Inlet: The water inlet should be inside the water closet beside the bidet’s side table.
• Apply Teflon Tape: Use Teflon tape to seal the inlet threads so that they don’t leak.
• Connect the T-Valve: Turn the T-valve onto the water inlet socket by hand. Then, use a wrench to tighten it, however be cautious no longer to over- tighten it.
• Position the Valve: Once attached, ensure that the side outlet of the valve is accessible and free from any obstruction, which can be used to fix the bidet hose.

4. Fasten the Hose Back

Connect the toilet hose back to the T-valve top outlet and ensure its tight enough to stop leaking.

5. Connect the Bidet Hose

One give up of the brand new bidet hose ought to be connected to one side of the T-valve, at the same time as the other quit have to be linked to the bidet spray head.

6. Mount the Bidet Spray Holder

The bidet spray can then be attached to the mounting bracket or wall beside the toilet. Depending on the layout, the holder can also require adhesive, screws, or an easy clip-on installation.

Installing a New Bidet Spray

Installing a new bidet spray should be the easiest of them all and can be done by following these steps:

• Remove the Old Components: Cut off the water supply and detach the old spray, the hose tape, and the t-valve connected to the toilet inlet. Ensure that the inlet thread is fine and has no friction or dust.
• Examine the Connections: Before adding the new components, confirm that all connections are clean and not damaged.
• Affix the New Bidet Spray: Follow the previously described steps to fix the new t-valve, its hose, and the sprayer.